| Availability: | |
|---|---|
| Quantity: | |
ALT-PP200
ALT
ALT-PP200 Fully automatic ultrasonic production of disposable PP non-woven oversleeve machine
The ALT-PP200 is a compact, fully automated oversleeve machine for disposable PP non-woven arm covers. A non-woven roll is mounted on the machine, the web is welded and cut in one continuous flow, and finished elastic oversleeves come off the discharge end .
The machine is built around six high-power ultrasonic welding units. Ultrasonic energy fuses the non-woven fibres without thread, needle or glue, so the welded seam is firm, flat and does not tear along the stitch line - a common complaint on sewn disposable oversleeves. Because there is no needle to break and no thread to run out, a single operator can run the line at 50 to 80 pieces per minute with very few interruptions.
With a footprint of only 2400 × 1020 mm and a weight of 1000 kg, the ALT-PP200 suits a small workshop or a corner of an existing mask and cap plant. It can be installed alongside a cap machine, mask machine or shoe cover machine to build a complete disposable protective wear line from one production area.
The points below describe how the machine behaves in production and what each feature saves for the buyer.
· Six ultrasonic welding units. High-power welding gives a firm, thread-free seam; the welded edge stays soft against the skin and does not unravel in use.
· Fully automatic operation. Raw material in, finished oversleeve out. Feeding, welding and cutting run continuously, so one operator covers the machine.
· Double air shafts with magnetic tension. Two rolls can be loaded and web tension is held by magnetic tension units, which keeps the oversleeve size stable as the roll runs down.
· Auto stop sensors. Two sensors stop the machine when material runs out, protecting the ultrasonic horns from dry running.
· Inverter speed control. Output is set steplessly between 50 and 80 pcs/min to match packing capacity and operator pace.
· Compact aluminium frame. Light, rust-free and movable within the workshop; the machine can be repositioned without a crane.
Table 1 ALT-PP200 technical parameters
Parameter | Specification |
Model | ALT-PP200 |
Machine type | Fully automatic ultrasonic oversleeve making machine |
Power supply | AC 380 V / 220 V, 50 Hz |
Power | 10 kW |
Optimum speed | 50 – 80 pcs / min |
Overall dimension | 2400 × 1020 × 1700 mm (L × W × H) |
Weight | 1000 kg |
Raw material | PP non-woven fabric |
Finished product | Disposable oversleeve (arm sleeve cover) |
Welding | Ultrasonic, 6 units |
Operation | Fully automatic, 1 operator |
Table 2 Standard supply scope
Component | Qty | Function |
Ultrasonic welding unit | 6 sets | Welding of the oversleeve body and elastic edge without thread or glue |
Main motor | 1 set | Drives the feeding and welding line |
Inverter | 1 set | Stepless speed regulation between 50 and 80 pcs/min |
Air shaft | 2 sets | Roll mounting and quick roll change |
Auto stop sensor | 2 sets | Automatic stop when material runs out |
Magnetic tension unit | 2 sets | Web tension control from full roll to roll end |
The finished oversleeve is a lightweight PP non-woven arm cover with an elastic, ultrasonically sealed edge, supplied flat for bag packing. It is worn over the sleeve to protect clothing and skin from dust, liquid and contamination (Figure 1).
Figure 1 Disposable PP non-woven oversleeves produced on the ALT-PP200
Disposable oversleeves are consumed in the same workplaces that use disposable caps, masks and shoe covers, so the disposable sleeve cover making machine is normally bought together with other disposable protective wear equipment. Typical applications include hospital wards and clinics, food processing and catering, electronics and cleanroom assembly, laboratories, beauty salons and cleaning services.
When buyers compare a non-woven oversleeve production machine with a conventional arm sleeve cover machine, three figures usually decide the purchase: how many welding units seal the seam, how many pieces per minute the line runs, and whether two rolls can be loaded at once. On the ALT-PP200 these are six ultrasonic units, 50 to 80 pieces per minute and two air shafts with magnetic tension - the specification a converter needs to quote disposable protective oversleeves competitively.
Table 3 Packing and commercial terms
Item | Terms |
Packing | Wooden case packing suitable for sea freight |
Delivery time | 50 days after order confirmation |
Payment | 40% of the total value by T/T in advance; the remaining 60% by T/T after inspection of the finished machine |
Shipment | Goods are shipped after the full payment has arrived in our account |
Warranty | 1 year (ultrasonic equipment and wearing parts excluded) |
Price | USD 15,000 FOB Shanghai |
Minimum order | 1 set |
Please send us the oversleeve size, the PP non-woven weight and roll width you intend to use, and your local voltage when enquiring. We will confirm the mold, the packing specification and the delivery schedule in the quotation.